Modular ISO 6 Hardwall and Softwall cleanrooms provide advanced particle protection for your project needs. They require numerous air changes and allow a limited number of maximum particle concentration limits per room. ISO class 6 cleanrooms are recommended for applications that require moderate particle concentrations within a given space.
At Clean Air Products, we provide ISO 6 cleanrooms that comply with all ISO 14644-1 standards, which regulates a room’s maximum allowable particle count and air changes per hour. Our ISO 6 cleanroom systems are available in both hardwall and softwall options and can be modified to address your exact specifications.
Contact us for more information regarding our ISO class 6 cleanroom specifications and options. Clean Air Products is your trusted manufacturer and supplier of high efficiency, ultra-clean ISO 6 cleanrooms.
ISO 6 Cleanroom Particle Count Classifications
ISO cleanroom cleanliness standards are based upon a room’s particle levels within a given area and is measured according to the quantity and size of particles per volume of air. The following ISO cleanroom classification table shows the differences between ISO classes and number of allowable particles per particle size.
ISO 6 Cleanroom Qualities & Standards
Cleanrooms are classified according to the number and size of particles permitted per volume of air in a specific amount of time. There is also a direct relationship between cleanroom class ratings and the room’s air changes per hour. An ISO 6 or Fed-Std 209E class 1,000 cleanroom must have 1,000,000 or less ≥0.1 µm sized particles, 237,000 or less ≥0.2 µm sized particles, 102,000 or less ≥0.3 µm sized particles, 35,200 or less ≥0.5 µm sized particles, 8,320 or less ≥1 µm sized particles, and 293 or less ≥5 µm sized particles. An ISO 6 class cleanroom must also maintain 150-240 air changes per hour with a ceiling coverage of 25-40%.
Modular ISO 6 Cleanroom Hardwall & Softwall Options
Whether you are looking for an ISO class 6 cleanroom that is a permanent fixture within your facility, or a room that can be easily transported, Clean Air Products has both hardwall and softwall ISO class 6 cleanrooms that meet your project’s requirements. Fed-Std 209E class 1,000 cleanrooms feature hard wall construction mounted between anodized aluminum posts to create a fully enclosed area, while our softwall ISO 6 cleanrooms are designed for functionality and reduced cost, while delivering all the benefits of modular construction.
ISO Class 6 Clean Room Applications
Depending on your application’s exact specifications, Clean Air Products will design a cleanroom that addresses your product’s exact standards of cleanliness. Our ISO 6 modular clean rooms provide the lowest allowable particle quantities per particle size, delivering a true cleanroom experience that cannot be matched.
Additional ISO Class Cleanroom Options
If an ISO 6 Cleanroom is not the cleanroom standard that you require, we also provide all other types of ISO class cleanrooms, ensuring that you find the cleanroom type that is correct for your application. The other types of ISO 14644-1 approved cleanrooms that we provide include:
Contact Clean Air Products for ISO 6 Cleanrooms Today
Contact us for more information regarding our modular hard and soft wall ISO class 6 clean room options or request a quote for direct pricing information today. Clean Air Products is your preferred manufacturer and supplier of hard and soft walled Fed-Std 209E class 1,000 cleanrooms.
Our website uses cookies. For more information on our cookie use, see our Privacy Policy. By continuing to use this website you agree to our use of these cookies.
